HPE 1950 12XGT 4SFP+ SWITCH
Part# JH295A
EAN:0889296308577
HPE OfficeConnect 1950 12XGT 4SFP+ - Switch - 12 x 10GBase-T + 4 x 1 Gigabit / 10 Gigabit SFP+ - desktop, rack-mountable
Native product specifications. The product description originates from Cnet. Foxway Distribution accepts no responsibility for error or misinformation in product descriptions from Cnet.
Product specifications
Product Description | HPE OfficeConnect 1950 12XGT 4SFP+ - switch - 12 ports - rack-mountable |
Manufacturer Warranty | Limited lifetime warranty |
Features | Flow control, full duplex capability, auto-negotiation, auto-uplink (auto MDI/MDI-X), half duplex mode, full duplex mode, Quality of Service (QoS), 2MB packet buffer, DiffServ Code Point (DSCP) support |
Dimensions (WxDxH) | 44 cm x 16 cm x 4.4 cm |
Weight | 3.66 kg |
Power | AC 120/230 V (50/60 Hz) |
Device Type | Switch - 12 ports |
Enclosure Type | Rack-mountable 1U |
Compliant Standards | IEEE 802.3, IEEE 802.3i, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3az |
Capacity | IPv4 routing table entries: 512 ¦ IPv6 routing table entries: 256 |
Remote Management Protocol | SNMP, RMON, HTTPS, CLI |
Performance | Routing/switching capacity: 320 Gbps ¦ Throughput (64-byte packet size): 238 Mpps ¦ Latency (100 Mbps): 5 µs ¦ Latency (1000Base-T): 5 µs |
MAC Address Table Size | 16384 entries |
Ports | 12 x 10GBase-T + 4 x 1 Gigabit / 10 Gigabit SFP+ |
Jumbo Frame Support | 10KB |
Subtype | 10 Gigabit Ethernet |
General features
Device Type | Switch - 12 ports |
Enclosure Type | Desktop, rack-mountable 1U |
Subtype | 10 Gigabit Ethernet |
Ports | 12 x 10GBase-T + 4 x 1 Gigabit / 10 Gigabit SFP+ |
Performance | Routing/switching capacity: 320 Gbps ¦ Throughput (64-byte packet size): 238 Mpps ¦ Latency (100 Mbps): 5 µs ¦ Latency (1000Base-T): 5 µs |
Capacity | IPv4 routing table entries: 512 ¦ IPv6 routing table entries: 256 |
MAC Address Table Size | 16384 entries |
Jumbo Frame Support | 10KB |
Remote Management Protocol | SNMP, RMON, HTTPS, CLI |
Features | Flow control, full duplex capability, auto-negotiation, auto-uplink (auto MDI/MDI-X), half duplex mode, full duplex mode, Quality of Service (QoS), 2MB packet buffer, DiffServ Code Point (DSCP) support |
Compliant Standards | IEEE 802.3, IEEE 802.3i, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3az |
Processor | 1 Cortex-A9: 1.25 GHz |
RAM | 1 GB SDRAM |
Flash Memory | 512 MB |
Ports
Interfaces | 12 x 10GBase-T RJ-45 ¦ 4 x Gigabit / 10Gbit LAN SFP+ ¦ 1 x console RJ-45 ¦ 1 x management RJ-45 |
Warranty
Service & Support | Limited warranty - advance parts replacement - lifetime - shipment - response time: next business day ¦ Technical support - phone consulting - lifetime |
Compliance
Cables Included | 1 x power cable - 1 m |
Rack Mounting Kit | Included |
MTBF | 81.8 years |
Compliant Standards | CISPR 22 Class A, EN55022, EN 61000-3-3, EN55024, UL 60950, CISPR 22, ICES-003 Class A, IEC 60950-1, EN 60950-1, ISO 7779, EN 61000-3-2:2006+A1:2009+A2:2009, VCCI Class A, EN 61000-3-2:2000, EN 62479:2010, GB 4943.1, EN 300 386 V1.6.1, EN 61000-3-3:2013, EN 55024:2010, EN 55022:2010 Class A, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 55032:2012, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 |
Power
Power Device | Internal power supply |
Power Provided | 800 Watt |
Voltage Required | AC 120/230 V (50/60 Hz) |
Power Consumption Operational | 75 Watt |
Software
Software Included | HP Web browser, HP Intelligent Management Center |
HDD / SSD tolerance
Min Operating Temperature | 0 °C |
Max Operating Temperature | 45 °C |
Humidity Range Operating | 10 - 90% (non-condensing) |
Min Storage Temperature | -40 °C |
Max Storage Temperature | 70 °C |
Humidity Range Storage | 5 - 90% (non-condensing) |
Physical dimensions
Width | 44 cm |
Depth | 16 cm |
Height | 4.4 cm |
Weight | 3.66 kg |
Specifications
HPE OfficeConnect 1950 Switch Series har en intuitiv webbaseret brugerflade til enkel tilpasning af netværksdriften. Den understøtter true-stacking, hvor aggregation-switchen understøtter op til to enheder, mens access-switchen tillader op til fire enheder, der logisk administreres som en enkelt enhed, hvilket forenkler administrationen og samtidig understøtter større netværksredundans. Modellerne understøtter både rackmontering og skrivebordsdrift. Disse switche har IPv4- og IPv6-drift, med Layer 2-switching samt Layer 3 statisk routing. Andre funktioner omfatter: link aggregation for at øge link performance; VLANs, Access Control Lists og 802.1X netværkslogin for øget sikkerhed; og tre versioner af Spanning Tree Protocol (STP) for øget netværksresiliens.
- Four-high true stacking simplifies administration of multiple devices
Create a single logical managed unit with up to four HPE OfficeConnect 1950 switches. Balance connections across multiple units with Link Aggregation (LACP) for enhanced network resiliency. Stack using affordable Cat 6a, or long distance fiber, or localized DAC cables. - Intuitive Web browser-based management
Allows for easy customization of the switch even by non-technical users. - Secure Web-management sessions with HTTPS / SSL
Encrypts and otherwise protects management sessions through HTTP Secure (HTTPS). Prevents snooping of sensitive management information such as passwords. - SNMPv1, v2c, and v3
Facilitates remote management of the switch, as the device can be discovered and monitored from an SNMP management station. - Complete session logging
Provides detailed information for problem identification and resolution. - Dual flash images
Provides independent primary and secondary operating system files for backup while upgrading. - Port mirroring
Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring. - Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients, keeps timekeeping consistent among all clockdependent devices within the network so that the devices can provide diverse applications based on the consistent time. - IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications. - Limited Command Line Interface (CLI)
Facilitates in the deployment and initial configuration of the unit. Supports troubleshooting actions as well. - RMON
Provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events. - Default DHCP client modes
Simplify device deployment. Connect a switch to a network with a DHCP server and the device will obtain its IP address automatically with Plug-and-Play operation.